All Products / Label Dispensers/Applicators /Bottle Label Applicator

Bottle Label Applicator

Bottle-Label-Dispensers Available in manual and semi-automatic models, Bottle labelers will apply pressure sensitive labels to any round product including; bottles, cans, tubes and cylinders. Features of our bottle labelers include; product placement fixtures for consistent labeling, technologically advanced non-contact sensors, heavy duty construction for reliable service and a reputation for quality machinery at competitive prices.

Advent/advent301.jpg

Advent 302 Bottle Labeler from Star Packaging Supplies Co.

Advent/advent300.jpg

Advent/advent310.jpg

Advent/200.jpg

Advent/advent205.jpg
301 Crank Labeler 302 Hand Trigger Labeler 300 Semi-Auto Labeler 310 Pass Through Labeler 200 Plain Paper Labeler 205 Five Gallon Pail Labeler

 Advent Brand Labelers

Advent/advent301.jpg

Model 301  $2100.00

The Model 301 is hand driven by a four inch diameter crank wheel and therefore does not require electrical power. It is the same size and has the same adjustments as the standard Model 300. The labeler can be easily moved from tabletop to tabletop. It can be converted to a standard model 300 at a later time.

Can label at speeds of 15 to 25 containers per minute and can out produce many labeling machines that are motor driven.

Features:

  • Applies labels to round containers fro one ounce to one gallon
  • Labels 10 to 20 containers per minute.
  • Fast container size change with no change parts or special tools necessary,
  • Two Year Warranty.

Container Specifications:

Container Diameter: 1-1/4" to 6" (3.175 cm. to 5.24 cm.)

  • Label Size Min: 1"W by 1 "L (2.54 cm. by 2.54 cm)
  • Label Size Max: 7" (18 cm.)

Machine Specifications:

Machine Size: 20"Wx 26"Lx 36"H (50 cm.x 66 cm.x 91 cm.)



 

Advent 302 Bottle Labeler from Star Packaging Supplies Co.

Model 302  $3050.00

The Advent Model 302 is a Low Cost Pressure-Sensitive Labeling Machine. Unique when compared to other semi-automatic P-S labelers. With its ingenious design, air pressure and a label sensing switch are not required in its operation. Air pressure on other machines is required to lift the container up to the point of label application and then down where it is removed. This raising and lowering of the container wastes time. Advent has chosen to apply the label from the bottom of the container and use the weight of the container to press on the label. This method saves application time and increases labeling speed considerably. On other machines, the label sensing switch senses the space between labels on the label web in order to tell the machine when to feed a label. Advent does not require this switch which enables it to apply butt cut labels along with die cut labels.

The Advent Model 302 is not a small table top labeler. This model is a production machine. It is designed for continuous operation.

Features:

  • Applies labels to round containers from one ounce to one gallon
  • Hand Trigger
  • Labels 25 containers per minute.
  • Fast container size change with no change parts necessary,
  • No Air Required
  • Two Year Warranty.

Container Specifications:

  • Container Diameter: 1" to 12" (2.54 cm. to 30.48 cm.)
  • Label Size Min: 3/4"W by 1"L (2.54 cm. by 2.54 cm.)
  • Label Size Max: 7" (18 cm.)

Machine Specifications:

  • Machine Size:20"Wx 26"Lx36"H(50cm.x66cm.x91 cm.)
  • Electrical: 120 v, 60 Hz, 10 amp. standard 240 volt available.




Advent/advent300.jpg

Model 300   $4475.00

The Advent Model 300 Pressure-Sensitive Labeling Machine is unique when compared to other semi-automatic P-S labelers. With its ingenious design, air pressure and a label sensing switch are not required in its operation. Air pressure on other machines is required to lift the container up to the point of label application and then down where it is removed. This raising and lowering of the container wastes time. Advent has chosen to apply the label from the bottom of the container and use the weight of the container to press on the label. This method saves application time and increases labeling speed considerably. On other machines, the label sensing switch senses the space between labels on the label web in order to tell the machine when to feed a label. Advent does not require this switch which enables it to apply butt cut labels along with die cut labels.

The Advent Model 300 is not a small table top labeler. This model is a production machine. It is designed for continuous operation.

Features:

  • Applies labels to round containers from one ounce to one gallon
  • Labels 20 to 40 containers per minute.
  • Fast container size change with no change parts necessary,
  • Machine stand with casters.
  • One Year Warranty.

Container Specifications:

  • Container Diameter: 1-1/4" to 6" (3.175cm. to 15.24 cm.)
  • Label Size Min: 1"W by 1"L (2.54 cm. by 2.54 cm.)
  • Label Size Max: 7" (18 cm.)

Machine Specifications:

  • Machine Size:20"Wx 26"Lx36"H(50cm.x66cm.x91 cm.)
  • Electrical: 120 v, 60 Hz, 10 amp. standard 240 volt available.




Advent/advent310.jpg

Model 310  $5100.00

The Advent Model 310 is what you might call an almost automatic Pressure-Sensitive labeling machine. Containers are fed into the machine by hand but are ejected automatically As the operator places the container into the machine the previous labeled container is pushed forward and onto a short gravity conveyor. If the containers are filled, they roll forward to the packing station. If they are empty, they can roll off into a box or go directly to the filling line.

By handling each container only once, labeling speed is increased considerably. Speeds up to 30 to 40 containers per minute are not uncommon.

Features:

  • Applies labels to round containers from one ounce to one gallon
  • Labels 30 to 40 containers per minute.
  • Fast container size change with no change parts necessary.
  • Machine stand with casters.
  • Two Year Warranty.

Container Specifications:

  • Container Diameter: 3/4" to 6" (3.175 cm. to 15.24 cm.)
  • Label Size Min: 1"W by 1 "L (2.54 cm. by 2.54 cm)
  • Label Size Max: 7" (18 cm.)

Machine Specifications:

Machine Size: 20"Wx 26"Lx 36"H (50 cm. by 66 cm. by 91 cm.)

Electrical: 120 v, 60 Hz, 10 amp. standard 240 volt available.


 

Advent/200.jpg

Model 200 Plain Paper Label Applicator   $7275.00

The Advent Model 200's packed with features that may not be easily noticed from first observation, but hidden beneath the tough chemical resistant ABS plastic cover is a labeling machine capable of satisfying the needs of the most discriminating buyer

You can say that you are using too much glue and there are raised rings around your container not to mention the glue that can be seen through the label itself- Problems solved - eliminate the majority of the glue on the label and you will eliminate these problems. The Advent Labeler does exactly that, by applying glue to only the ends of the label with its patented end gluing feature that requires no adjustments for different length label. The machine does it automatically What's more, this feature is standard on Model 200.

  The Advent Model 200's packed with features that may not be easily noticed from first observation, but hidden beneath the tough chemical resistant ABS plastic cover is a labeling machine capable of satisfying the needs of the most discriminating buyer

You can say that you are using too much glue and there are raised rings around your container not to mention the glue that can be seen through the label itself- Problems solved - eliminate the majority of the glue on the label and you will eliminate these problems. The Advent Labeler does exactly that, by applying glue to only the ends of the label with its patented end gluing feature that requires no adjustments for different length label. The machine does it automatically What's more, this feature is standard on Model 200

Features:
  • Applies labels to round containens from one Ounce to one gallon.
  • Applies glue to the ends of the label or the whole label.
  • Automatically adjust glue pattern
    Labels 20 to 40 containers per minute.
  • Fast container size change with no change parts necessary.
  • Automatic label feed via standard large (appmx- 300 labels).
  • Capacity label hopper.
  • Machine stand with casters.
  • One Year warranty.

Container Specifications:

  • Container Diameter: 1-1/4" to 6" (3.175cm. to 15.24 cm.)
  • Label Size Mm: 3-1/2"W by 1 "L (8.89cm-by 2.54cm.)·
  • Label Size Max;7" (I8 cm.)

Machine Specifications:

  • Machine Size: 20"W x 66"L x 36"H (50 cm x 66cm x 91cm.)
  • Electrical: 120 v 60 Hz, amp- 240 volt available.




Advent/advent205.jpg

Model 205 Five gallon Pail Labeler   $8300.00

THE MODEL 205 is designed for semi-automatic application ot plain labels to five gallon round containers.

The Model 205-T automatically registers labels between lugs on metal or plastic pails while being capable of handling other round containers down to quarter pints.


Features:

  • Labels round containers from l/4 pint to five gallons.
  • Hot melt or cold glue available
  • Applies glue to ends or to the whole label.
  • Labels approximately 15 five gallon containers or 30 half pint containers per minute.
  • Quick container change-over... approx. 1 minute.
  • Automatic label feed via standard large (approx. 300 labels) capacIty label hopper.
  • Does not require highly trained or skilled operating personal.
  • Simplified engineering eliminates such problems as timers and solenoids.
  • Measures: 20"W X 28"L x 36"H.
  • 2 year factory warranty.

Specifications:

  • Container Diameter: 3in. x 12in.
  • Label Mm: 3in. x 5in.
  • Label Max: 7in x 17in.

Machine Specifications:

  • Machine: 20" W x 20" L x 38" H
  • Electrical: 110V, 60Hz, 10 amps.

Please enable JavaScript for this website to fully function.